KE Arms KP-15 Monolithic AR Lower Receiver and Buttstock, Stripped, Black Polymer New: $109.95
Complete $199.99 (Polymer) - FDE & black
https://www.brownells.com/manufacturers/ke+arms+llc/index.htm?msclkid=83d53f9f8774126a33675f329e962b3a
https://www.jgsales.com/ke-arms-kp-15-monolithic-ar-lower-receiver-and-buttstock,-stripped,-black-polymer-new.-p-106221.html
https://kearms.americommerce.com/ - discounts on blermished items ...
Practicality Meets Affordability (Brownell's description):
What makes this lower different than its counterparts? The answer is simple… the KE Arms KP-15 is a monolithic polymer AR-15 style lower receiver made from injection molded, 30% glass-filled nylon. Its unique design incorporates the buffer tube, pistol grip, trigger and a 13-inch (LOP) buttstock into the receiver as integral components. The result is an affordably priced, lightweight lower receiver.
The KE Arms KP-15 lower receiver uses a carbine buffer and spring. The take down and pivot pins have built-in detents, which increases durability by eliminating the spring and detent holes. The buffer detent (should you choose to use it) is held in place with a 5/64" roll pin. The hammer pin area is wider for durability; standard AR-15 hammer pins can still be used, though the KE Arms longer hammer pin is recommended for customers preferring a flush pin for aesthetic reasons.
The safety selector spring and detent have been designed to load from the top, then the selector is slid over them. (Standard selectors can work but removing them can be particularly difficult. KE Arms recommends the use of their designated mil-spec selector or ambi selector to make removal easier. Follow the manufacturer's assembly guide for further instructions.)
Weight: 1.704 lbs.
Compatible with all Mil-Spec fire control groups
Compatible with cassette style match triggers
Flared magwell
Available in black and flat dark earth
MLOK Slots at rear of stock for sling attachment
Pre-drilled in front for QD socket inserts
Uses a standard bolt catch. Cannot accept the PDQ lever. The PDQ lever is exclusive to the WWSD complete rifle.
Do NOT use anything other than standard carbine buffers and round springs or the JP SCSS in the KP-15.
WARNING!: This item is legally classified as a receiver. You Must be 21 years old to purchase this item and a resident of the same state your transferring dealer is licensed in.
The KE Arms KP-15 is compatible with standard AR-15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 6.5mm Grendel and 6.8mm SPC. The lower receiver is also compatible with 9mm blowback systems, when used with a minimum buffer weight of 5.4oz (carbine). Failure to use a minimum buffer weight of 5.4oz can damage the lower.
CERAKOTE: If you intend to Cerakote your KP-15 the manufacturer recommends the bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping.
WARRANTY: The KE Arms KP-15 has a lifetime warranty for normal use. If the receiver breaks through misuse or neglect, KE Arms will replace it ONCE for $65.00.
NOTE: Not recommended for .458 SOCOM, .50 Beowulf or .50 BMG. Please contact KE Arms if you intend to register your KP-15 lower receiver as an NFA weapon.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
More from J&G:
It is compatible with all Mil-Spec Fire Control Groups, and cassette style match triggers including the KE Arms DMR and SLT units. The hammer pin area is wider for durability, and standard AR15 hammer pins can still be used but longer hammer pins are available from KE Arms if you prefer a flush pin. Safety selector spring and detent load from the top and then the selector is slid over them. Standard selectors can work but removing them can be particularly difficult. You can obtain an optimized mil-spec selector or optimized ambi selector from KE Arms to make removal easier. The KP-15 is compatible with standard AR15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 7.62x39mm, 6.5mm Grendel, 6.8mm SPC, .350 Legend; make sure you use the appropriate weight carbine buffer for your rifle to eject
Complete $199.99 (Polymer) - FDE & black
https://www.brownells.com/manufacturers/ke+arms+llc/index.htm?msclkid=83d53f9f8774126a33675f329e962b3a
https://www.jgsales.com/ke-arms-kp-15-monolithic-ar-lower-receiver-and-buttstock,-stripped,-black-polymer-new.-p-106221.html
https://kearms.americommerce.com/ - discounts on blermished items ...
Practicality Meets Affordability (Brownell's description):
What makes this lower different than its counterparts? The answer is simple… the KE Arms KP-15 is a monolithic polymer AR-15 style lower receiver made from injection molded, 30% glass-filled nylon. Its unique design incorporates the buffer tube, pistol grip, trigger and a 13-inch (LOP) buttstock into the receiver as integral components. The result is an affordably priced, lightweight lower receiver.
The KE Arms KP-15 lower receiver uses a carbine buffer and spring. The take down and pivot pins have built-in detents, which increases durability by eliminating the spring and detent holes. The buffer detent (should you choose to use it) is held in place with a 5/64" roll pin. The hammer pin area is wider for durability; standard AR-15 hammer pins can still be used, though the KE Arms longer hammer pin is recommended for customers preferring a flush pin for aesthetic reasons.
The safety selector spring and detent have been designed to load from the top, then the selector is slid over them. (Standard selectors can work but removing them can be particularly difficult. KE Arms recommends the use of their designated mil-spec selector or ambi selector to make removal easier. Follow the manufacturer's assembly guide for further instructions.)
Weight: 1.704 lbs.
Compatible with all Mil-Spec fire control groups
Compatible with cassette style match triggers
Flared magwell
Available in black and flat dark earth
MLOK Slots at rear of stock for sling attachment
Pre-drilled in front for QD socket inserts
Uses a standard bolt catch. Cannot accept the PDQ lever. The PDQ lever is exclusive to the WWSD complete rifle.
Do NOT use anything other than standard carbine buffers and round springs or the JP SCSS in the KP-15.
WARNING!: This item is legally classified as a receiver. You Must be 21 years old to purchase this item and a resident of the same state your transferring dealer is licensed in.
The KE Arms KP-15 is compatible with standard AR-15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 6.5mm Grendel and 6.8mm SPC. The lower receiver is also compatible with 9mm blowback systems, when used with a minimum buffer weight of 5.4oz (carbine). Failure to use a minimum buffer weight of 5.4oz can damage the lower.
CERAKOTE: If you intend to Cerakote your KP-15 the manufacturer recommends the bake should be done at low temperatures (<190 Degrees F) and with an upper in place to prevent warping.
WARRANTY: The KE Arms KP-15 has a lifetime warranty for normal use. If the receiver breaks through misuse or neglect, KE Arms will replace it ONCE for $65.00.
NOTE: Not recommended for .458 SOCOM, .50 Beowulf or .50 BMG. Please contact KE Arms if you intend to register your KP-15 lower receiver as an NFA weapon.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
More from J&G:
It is compatible with all Mil-Spec Fire Control Groups, and cassette style match triggers including the KE Arms DMR and SLT units. The hammer pin area is wider for durability, and standard AR15 hammer pins can still be used but longer hammer pins are available from KE Arms if you prefer a flush pin. Safety selector spring and detent load from the top and then the selector is slid over them. Standard selectors can work but removing them can be particularly difficult. You can obtain an optimized mil-spec selector or optimized ambi selector from KE Arms to make removal easier. The KP-15 is compatible with standard AR15 uppers in calibers including .223/5.56mm NATO, .300 Blackout, 7.62x39mm, 6.5mm Grendel, 6.8mm SPC, .350 Legend; make sure you use the appropriate weight carbine buffer for your rifle to eject
No comments:
Post a Comment